Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
Machine Error Code Registers
When an error code appears on the SSD, it will be saved to register 14, the next time an error code appears, the
previously saved value in register 14 will be moved to 13, and the most recent time stamp will be recorded in 14.
So, registers 14-10 are used record the previous error codes, in reverse chronological order.
10
The oldest recorded error information.
11
The 4
most recent recorded error information.
th
12
The 3
most recent recorded error information.
rd
13
The 2
most recent recorded error information.
nd
14
The most recent recorded error information. (Error displayed: "14" > E### > yyyy > mm.dd > hh.mm >"14".
">" means press Start/Pause.)
Coin Box Time Stamp Registers (Time in 24-hour format)
The unit can save up to five recent coin box opening time stamps. When the coin box is inserted into the vault for
at least 60 seconds, a CBC (Coin Box Closed) flag will be set in memory. When the coin box is removed from the
vault, and the coin box switch opens for at least 2 seconds, the value of the real time clock will be read and saved
to register 15, the next time the coin box is removed, the previously saved value in register 15 will be moved to 16,
and the most recent time stamp will be recorded in 15. So registers 15-19 are used to record the previous five coin
box openings, in chronological order.
15
Coin Box Access 1: The most recent access time: "15" > yyyy > mm.dd > hh.mm > "15".
16
Coin Box Access 2: Time stamp 2.
17
Coin Box Access 3: Time stamp 3.
18
Coin Box Access 4: Time stamp 4.
19
Coin Box Access 5: Oldest access: "19" > yyyy > mm.dd > hh.mm > "19".
Register Addresses for Setting Parameters
20
Set Main Wash water level. (Range 5-32L, default is 7L.)
21
Set Rinse water level. (Range 5-32L, default is 10L.)
22
Set Rinse time. (00 is rinsing twice, 01 is 1 rinse, default is 01.)
23
Set Heavy Soil. (00 is adding Heavy Soil, 01 is no Heavy Soil, default is 01. Heavy Soil is not available for
Delicate.)
24
Set default cycle selection using blinking Delicate button. (Default setting is 00.)
00- Set Cold cycle as default
01- Set Warm cycle as default
02- Set Hot cycle as default
03- Set Delicate cycle as default
25
Set Main Wash time. (Range 0-999 seconds, default is 360 seconds.)
27
Set buzzer beep.
00 - buzzer on (default)
01 - buzzer off; the buzzer beep is only for washer with IC card payment system, after 4 seconds the IC
card be inserted, buzzer will sound twice short beep and off 2 seconds and repeat until the IC card be
pulled out.
28
WiFi connection status (read only)
00 - Offline mode, unit is not connected to WiFi and not in Commissioning process
01 - Commissioning mode, appears after pressing and holding the Start/Pause button for 10 seconds
02 - Connecting mode, appears once network credentials have been entered in Smart HQ app
03 - Connected mode, appears once successfully commissioned and online
29
Display SW version. (29 > UI version > Pr version > 29.)
30
Set final spin speed for Cold cycle (00 for 1050, 01 for 800; Default is 1050)
31
Set final spin speed for Warm cycle (00 for 1050, 01 for 800; Default is 1050)
32
Set final spin speed for Hot cycle (00 for 1050, 01 for 800; Default is 1050)
49-3000277 Rev 0
11
Publicidad
