Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENTS
FIG. 1
B
C
A
B
A - Circuit Description Chart
B - Mounting Holes
C - Cover
UNDERSTANDING YOUR TOOL
See Figure 1.
To reduce the risk of injury and product failure, read
and understand the information in this user's manual
as well as the information on the product labeling.
CIRCUIT BREAKERS
The 15A and 20A circuit breakers on the transfer switch
provide protection to the branch circuit when the circuit
selector is in the "GEN" position.
NOTE: When the circuit selector is in the "LINE"
position, the branch circuits are protected by the circuit
breakers in the load center.
D - 15 Amp Circuit Breaker
E - 20 Amp Circuit Breaker
F - Wattage Meter
CIRCUIT SELECTORS
The three position circuit selectors allow you to select
or remove power sources for the branch circuits wired
through the transfer switch. To connect branch circuits
to a generator select "GEN", to connect circuits to the
load center (utility) select "LINE", and to disconnect
circuits from all power sources select "OFF" (center).
B
H
B
G - Circuit Selector
H - Power Inlet Box
CAUTION
If a branch circuit is connected
to the transfer switch and a GFCI or AFCI breaker
at the load center, the branch circuit will only get
GFCI or ACFI protection when the circuit selector
is in the "LINE" position. GFCI and AFCI protection
is not provided when the circuit is powered by a
generator. GFCI or AFCI protection provided at the
outlet(s) will still be functional.
G
D
E
F
English | 7
Publicidad
