Publicidad
Idiomas disponibles
Idiomas disponibles
COMPONENTS
POWER INLET BOX
The power inlet box is mounted outdoors to provide a
safe means of connecting a generator to the transfer
switch.
DANGER
operating a generator, make sure it is located in
an open, outdoor area, at least 20 ft. (6 m.) from
occupied spaces with exhaust pointed away.
ASSEMBLY
REMOVING CARTON CONTENTS
WARNING
assembly. Do not attempt to operate this product if
it is not completely assembled. Using an improperly
assembled product can be hazardous and could
result in serious personal injury.
l Remove and inspect the carton contents. Verify that
all the items in the INCLUDED LIST are present and
undamaged.
l Recycle or dispose of the packaging materials properly.
INCLUDED LIST
See Figure 2.
Transfer Switch, Power Inlet Box, Power Cord, 1 in.
PVC Fitting, 1-1/4 in. PVC Fitting, Conduit, and User
Manual
If any parts are missing, contact our service team
at service@wpowereq.com or call 1-855-944-3571.
WARNING
product unless instructed to do so in this manual
or by the manufacturer. Do not use attachments or
accessories that are not recommended for use with
this product. Making unauthorized modifications
and using incompatible accessories can damage
the unit and void your warranty.
NOTICE
needed, but not included, to install and operate the
transfer switch.
8 | English
Asphyxiation hazard. When
This product does not require
Do not alter or modify this
An electrical junction box is
WATTAGE METER
The meters indicate the total load on either side of
the switch for branch circuits powered by a generator.
The meters do not measure load amounts for circuits
powered by the load center (utility).
NOTE: The meter on the left is for circuits A-E and the
meter on the right is for circuits F-J
FIG. 2
A - Transfer Switch
B - 1-1/4 in. PVC Fitting
C - Conduit
D - 1 in. PVC Fitting
E - Power Inlet Box
F - Power Cord
A
B
F
D
C
E
Publicidad
