Rohde ST 410 Instrucciones De Uso página 52

6. Operation & use
6.1. Keylock
Step Action
Unlock keys
1 If any key is pressed and "LOC" appears in the display, the keys are locked.
To unlock, press the
2
"ULOC" appears in the main display.
Lock keys
To lock, press the
1
"LOC" appears in the main display.
2 If any key is pressed and "LOC" appears in the display, the keys are locked.
h
6.2. INFO key
6.2.1. General description
h
The INFO button can be pressed at any time to obtain additional information. It doesn't matter whether the
controller is running a program or not.
6.2.2. Operation
h
INFO key
Key pressed once
Key pressed twice
Key pressed 3 times
Key pressed 4 times
Note
d f
and keys and hold it down for 5 seconds until
d f
and keys and hold it down for 5 seconds until
Description
The maximum temperature of the current program is displayed.
The currently consumed energy is displayed in kWh (parameter P14 must be set).
The current setpoint is displayed.
The controller shows the current temperature again.
After 10 seconds, the INFO display returns to the normal display (current kiln

temperature), if no button is pressed.
The INFO display can be ended immediately by pressing either the

button.
50 / 291 - EN -
Display screen
LOC
ULOC
LOC
LOC
g f d
or or