Rohde ST 410 Instrucciones De Uso página 59

6.5.3. Programming the "FULL" & "END" ramp rates
Programming a "FULL" heating or cooling ramp in the firing program:
Display Icon
Pr. 1
1
150
FULL
d f
*The keys or can also be held down for faster input.
Programming the "END" of a heating ramp or cooling ramp in the firing program:
Display Icon
Pr. 1
1
150
Meaning Description
Select the firing
Program number program that is to be
changed.
Select the segment
Indicator in the with the heating ramp
segment display to be changed into a
cooling ramp.
Heating ramp
The ramp rate for the
heating or cooling ramp
is shown in the main
Cooling ramp
display.
Heating ramp
Press or hold down
d
the
appears in the main
Cooling ramp
display.
Meaning Description
Select the firing
Program number program that is to be
changed.
Select the segment
Indicator in the with the heating ramp
segment display to be changed into a
cooling ramp.
Heating ramp
The ramp rate for the
heating or cooling ramp
is shown in the main
Cooling ramp
display.
57 / 291 - EN -
Remark
See Section 6.4.1.
See Section 6.4.1.
Possible main display:
1°C/h-999°C/h
 "FULL" heats or cools as fast as
possible.
key until "FULL"
 The "END" value is one step above
the ramp rate "999°C/h".
Remark
See Section 6.4.1.
See Section 6.4.1.
Possible main display:
1°C/h-999°C/h