GreenWorks STF457 Manual Del Operador página 7

WARNING
• If parts of the machine are damaged, do not use the
machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
8.2 ATTACH THE GUARD
WARNING
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a Phillips
head screwdriver (not included).
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw holes
on the trimmer head.
4. Tighten the screws.
8.3 ASSEMBLE THE SHAFT
1. Loosen the knob (12) on the coupler (7).
2. Push in the release button (13) on the lower shaft (8).
3. Align the release button with the positioning hole (14)
and slide the two shafts.
English
12
4. Turn the lower shaft until the button locks into the
positioning hole.
5. Tighten the knob.
8.4 ATTACH THE AUXILIARY
HANDLE
1. Remove the screws from the handle with a Phillips
screwdriver (not provided).
2. Attach the auxiliary handle (6) and lower clamp (15) on
the shaft.
3. Set the auxiliary handle in the most comfortable in use
position.
4. Tighten the screws.
7
7
14
13
8
12
6
EN
15