Soft Start; Number Of Stitches Of The Sewing Start Of Thread Tension; Number Of Stitches Of The Sewing End Of Thread Tension; Copy Destination No - JUKI MEB-3200 Manual De Instrucciones

(17) Soft start

(18) Number of stitches of the sewing start of thread tension

(19) Number of stitches of the sewing end of thread tension

(20) Copy destination No.

1) When setting the copy destination No. and pressing [READY
destnaton No. s stored n memory. The orgnal pattern data cannot be changed.
2) Set the pattern No. wth [RIGHT
Pattern located in the copy destination is overwritten. So, be careful.

1
2
1
2
1
2
2
1
] key 1 or [RIGHT
Sewing speed at the sewing start can be
limited.
Set the sewng speed wth [RIGHT
[RIGHT ] key 2 . Settng can be performed up to 6
rotatons at the sewng start.
Sewing speed per rotation can be set with
memory switches Nos. 1 to 6.
All machines have been delivered with the
speed set to 600 sti/min.
Number of stitches of the sewing start
section at the time of needle/looper thread
tension setting can be set.
Set the number of sttches wth [RIGHT
[RIGHT ] key 2 .
Settng can be performed "0" to 3 sttches.
Number of stitches of the sewing end
section at the time of needle/looper thread
tension setting can be set.
Set the number of sttches wth [RIGHT
[RIGHT ] key 2 .
Settng can be performed "0" to 3 sttches.
By setting a copy destination No. which
is different from the pattern No. currently
selected, when pressing [READY
light up the sewing LED, the pattern is copied
in the pattern No. which has been set in the
copy destination No. and stored in memory.
The original pattern is not changed.
When changing the pattern No. without pressing
[READY ] key or turning OFF the power, the
set value is not stored in memory.
] key, the pattern No. specified in the copy
] key 2 . The No. can be set 1 to 89.
] key 1 or
] key 1 or
] key 1 or
] key to