The Various Functions; Performing Procedure Of The Cycle Sewing - JUKI MEB-3200 Manual De Instrucciones

10. HOW TO USE THE VARIOUS FUNCTIONS

(1) Performing procedure of the cycle sewing

2
1
4
5
3
6
• When [READY
after the step will be deleted.
• When changing the cycle sewing without pressing [READY
data is not stored in memory.
When you desre to return the pattern to the prevous one or to skp to the next one at the tme of stop of the
sewng machne durng sewng, press [LEFT
presser goes up.) Dsplay of the pattern No. changes.
When the data is changed with each pattern, the contents registered in C1 to C3 also change.
So, be careful.
Example of display
Step 1 and pattern No. 11 of cycle sewing 1 (C1)
Program No. :
7
8
] key 2 is pressed with the display of pattern No. [ ] [ ] (no light-up), the pattern
] key 4 or [LEFT
Cycle sewing Step
C1 to C3 1 to 9
For the cycle sewing, three programs, C1
to C3, can be registered and maximum 15
different kinds of patterns (1 to 15 steps)
in the respective programs can be sewn in
order. (Set the data with individual patterns
in advance before resgistration.)
1) Make sure that sewng LED 1 has gone out.
When t lghts up, press [READY
make t go out.
2) Press [PATTERN ] key 3 to dsplay the pattern
No.
3) Press [LEFT ] key 4 or [LEFT
the program No. desred to regster. (C1 to C3)
4) Press [DATA ] key 6 .
5) Press [LEFT ] key 4 or [LEFT
dsplay the step of cycle sewng.
6) Press [RIGHT ] key 8 or [RIGHT
set the ndvdual pattern No.
7) Repeat the steps 5) to 6) and when the settng s
completed, dsplay the next step and make the
dsplay of ndvdual pattern No. [ ][ ] (no lght-up).
Then press [READY
LED 1 and the program s stored n memory.
] key 2 or turning OFF the power, the
] key 5 . (It s effectve only when the
Individual pattern No.
1 to 99
A,b,C,d,E,F
] key 2 to
] key 5 to select
] key 5 to
] key 7 to
] key 2 to lght up sewng