Canon XA Serie Guía De Usuario página 22

Added Functionality and Lens Compatibility
TL-H58 / TL-U58 Tele-converter
Using the TL-H58/TL-U58 Tele-converter with a Canon camera increases the focal length of the camera
lens by a factor of approximately 1.5. Depending on the camera, the image stabilization method and the
minimum object distance may change. For details about the various functions, refer to the instruction
manual of the camera being used.
Supplied Accessories
Soft case
Lens cap
Dust cap
Attaching a Tele-converter to the Camera
This section explains how to attach a tele-converter to the camera, using the TL-U58 as an example. You
can attach the TL-H58 following the same steps.
Screw the Tele-converter fully into the lens filter thread.
• Do not point the lens at the sun when the tele-converter is attached to the camera. This may
damage the camera.
• Other filters and the camera's lens hood cannot be used together with the tele-converter.
• Use a tripod to prevent motion blur.
• Clean the surfaces of the tele-converter and the camera's lens before use. Otherwise, the
camera may focus incorrectly on dust particles or other matter on the lens surfaces.
• Using the tele-converter may obstruct the front tally lamp*, reduce the effective range of the
wireless controller or cause a shadow to appear when recording using an optional video light*.
* Not all camera models feature a tally lamp or are compatible with optional video lights.
• When recording at full wide-angle (W) with the tele-converter attached, depending on the
camera model, the frame of the lens may appear around the outer edge of the picture.
• Take care when handling the tele-converter, to avoid smudging and fingerprints.
• Do not store the tele-converter in a humid place. It may mold.
• We recommend you attach the tele-converter to the camera before adjusting the white balance.
7
ADDED FUNCTIONALITY AND LENS COMPATIBILITY EN