Canon XA Serie Guía De Usuario página 24

WA-H58 / WA-U58 Wide Attachment
The WA-H58/WA-U58 Wide Attachment allows you to record movies and take photos covering a wider
angle of view. Depending on the camera, the image stabilization method and the minimum object distance
may change. For details about the various functions, refer to the instruction manual of the camera being
used.
Supplied Accessories
Soft case
Lens cap
Dust cap
Hood
Attaching a Wide Attachment to the Camera
This section explains how to attach a wide attachment to the camera, using the WA-U58 as an example.
You can attach the WA-H58 following the same steps.
1.
Remove the lens hood supplied with the camera and screw
the wide attachment fully into the lens filter thread ( ).
2.
Attach the hood supplied with the wide attachment to the front
of the wide attachment and tighten the locking screw ( ).
• Attach the hood straight, paying attention not to warp it. If the
hood is bent out of shape, its shadow may appear in the picture.
• Using the wide attachment, the outer periphery of the image may appear warped.
• Other filters and the camera's lens hood cannot be used together with the wide attachment.
• Clean the surfaces of the wide attachment and the camera's lens before use. Otherwise, the
camera may focus incorrectly on dust particles or other matter on the lens surfaces.
• Using the wide attachment may obstruct the front tally lamp*, reduce the effective range of the
wireless controller or cause a shadow to appear when recording using an optional video light*.
* Not all camera models feature a tally lamp or are compatible with optional video lights.
• Take care when handling the wide attachment to avoid smudging and fingerprints.
• Make sure to attach the lens cap when storing the wide attachment.
• Do not store the wide attachment in a humid place. It may mold.
• When adjusting the white balance, it is recommended to attach the wide attachment to the
camera first and then adjust the white balance.
9
ADDED FUNCTIONALITY AND LENS COMPATIBILITY EN