b) Upper arm cuffs:
Type S101 for arm circumference 24 - 33.7 cm or (9.5" - 13.25")
Type S102 for arm circumference 30.5 - 40.64 cm (12" - 16")
Your blood pressure monitor comes with two cuffs, one
medium and one large. If you ever need to buy a replacement cuff, use only Microlife or
CVS brand (Model #271237 for large size).
Please Note:
Arm circumference should be measured with a measuring tape in the middle of the relaxed
upper arm. Do not force cuff connection into the opening. Make sure the cuff connection is
not pushed into the AC adapter port. If the cuff is too small, call 1-866-464-6184 for further
information. You may prefer to use one of our wrist type monitors.
4. Using your Monitor for the First Time
4.1 Activating the pre-installed batteries
Pull out the protective strips projecting from the battery com-
partment.
4.2 Setting the date and time
1. After the new batteries are activated, the year number flashes
in the display. You can advance the year by pressing the "M"
button. To confirm and then set the month, press the time but-
ton.
2. You can now set the month using the "M" button. To confirm
and then set the day, press the time button.
3. Please follow the instructions above to set the day, hour and
minutes.
4. Once you have set the last minute and pressed the time button,
the date and time are set and the time is displayed.
5. If you want to change the date and time, press and hold the
time button down for approx. 3 seconds until the year number
starts to flash. Now you can enter the new values as described
above.
Memory
Button
Time/Date
Button
TIME
PM
7