Receiving And Storage - WEG SSW-08 Manual Del Usuario

2.4 RECEIVING AND STORAGE

The Soft-Starter SSW-08 is supplied in a cardboard box. On the outside of the package there
is an identification plate which is identical to the one placed on the Soft-Starter SSW-08.
To open the package:
1- Put it on a table;
2- Open the package;
3- Take out the Soft-Starter.
Check if:
The Identification plate of the Soft-Starter SSW-08 matches the model purchased:
„
Damage has occurred during transport. If so, contact the carrier immediately.
„
If the Soft-Starter SSW-08 is not installed immediately, store it in its package in a clean and
„
dry place with temperature between -25 °C (-13 °F) and 65 °C (149 °F). 1 hour at -40 °C (-40 °F)
is permitted.
SSW-08
Model
17 A
24 A
30 A
45 A
61 A
85 A
130 A
171 A
200 A
255 A
312 A
365 A
412 A
Table 2.1: Dimensions of the package in mm (in)
Height Width
H L
mm mm
(in) (in)
221 180
(8.70) (7.09)
260 198
(10.24) (7.80)
356 273
(14.02) (10.75)
415 265
(16.34) (10.43)
Figure 2.5: Dimensions of the package
General Information
Depth Volume Weight
P
mm cm kg
3
(in) (in ) (lb)
3
145 5768 1.65
(5.71) (352.2) (3.64)
245 12613 3.82
(9.65) (770.8) (8.42)
295 28670 8.36
(11.61) (1750) (18.43)
320 35192 10.5
(12.6) (2147) (23.2)
2
SSW-08 | 7