Technical Data - SKF TIH 030m Instrucciones De Uso

2.2

Technical data

TIH 030m
Voltage (±10%)
Recommended line protection
Power consumption (maximum)
Temperature control
Probe type
Probe maximum temperature
Time mode
Power range
Demagnetization
Overall dimensions (w x d x h)
Area between supports (width x height) 100 x 135 mm (3.9 x 5.3 in)
Coil diameter
Weight (with yokes)
Workpiece maximum weight b
Maximum heating temperature
m20*
Standard yoke dimensions:
45 x 45 x 215 (1.7 x 1.7 x 8.4 in)
28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in)
14 x 14 x 215 mm (0.6 x 0.6 x 8.4 in)
*m represents the weight (kg) of the heaviest SRB 231 bearing that can be
20
heated from 20 to 110 °C (68 to 230 °F) in 20 minutes.
SKF TIH 030m
230 V / 50/60 Hz or 110-100 V / 50/60 Hz
10 A fuse rating for 230 V
20 A fuse rating for 110 V
2.0 kVA
0-250 °C (32-482 °F); in steps of 1°
thermocouple, K type
250 °C (482 °F)
0-60 minutes; in steps of 0.1 minute
100%- 50%
automatic; residual magnetism <2A/cm
460 x 200 x 260 mm (18.1 x 7.9 x 10.2 in)
95 mm (3.7 in)
For minimum bearing bore diameter
of 100 mm (3.9 in)
20.9 kg (46.0 lbs)
bearing: 40 kg (88 lbs);
solid component: 20 kg (44 lbs)
approx. 400 °C (752 °F)
28 kg (bearing 23136)
For minimum bearing bore diameter of:
65 mm (2.6 in)
40 mm (1.6 in)
20 mm (0.8 in)
9