Removing The Ball Bearing; Checking The Pinion; Checking The Drive Shaft; Checking The Forward Gear - Yamaha F6AMH Manual De Servicio

A
B
DRIVE SHAFT AND FORWARD GEAR

REMOVING THE BALL BEARING

Remove:
Ball bearing


Adjusting shim(s)


Slide hammer handle 1:
YB-06096
Bearing puller 2:
90890-06535
Stopper guide plate 3:
90890-06501
A
For USA and Canada
B
Except for USA and Canada

CHECKING THE PINION

Check:
Teeth


Wear/damage

CHECKING THE DRIVE SHAFT

Check:
Drive shaft


Wear/damage

CHECKING THE FORWARD GEAR

Check:
Teeth


Wear/damage

CHECKING THE BALL BEARING

Check:
Ball bearing


Pitting/rumbling
NOTE:
Rotate the bearing and check if it turns
smoothly.
6-18
Replace.

Replace.

Replace.

Replace.