Cherubini ORIENS CRC Instrucciones página 47

SMART MODE - motors with mechanical limit switches
SETTING THE 3RD POSITION ACTIVATION PATH
only CH Black 3-position tilt mechanism
For CH Black 3-position tilt mechanism, the control unit has an automatic movement for
reactivating the memorized 3rd position, which corresponds to about 8 s of going up.
Normally, this time is sufficient to ensure the reactivation of the 3rd position.
If one wishes, it is possible to shorten or lengthen the reactivation path set.
CHANGING THE 3rd POSITION ACTIVATION PATH
Initiate the indicated command sequence and wait for the blind to be completely lowered
with the slats closed.
+
B C
The motor is now running in dead man mode, enabling
the fine adjustment of the 3rd activation path position.
Confirm the path with B (2 s). The venetian blind will now
lower with the slats open at the 3rd position.
To return to the original settings, the limit switch position must be deleted (see page 50).
+
B C
47
B
2 sec
B
2 sec