Cherubini ORIENS CRC Instrucciones página 60

To delete the sensor from the control unit, an already programmed remote control must
be used. The deleting sequence is the following:
+
A B
"PRIVACY" POSITION FOR DISAPPEARANCE OF THE SUN
In case the sun disappears, it is possible to set an intermediate "privacy" position for the
blind; this is to be used instead of the complete opening position. The "privacy" position
is memorized as ascent time starting from the lower limit switch.
SETTING THE "PRIVACY" POSITION IN SMART MODE
Procedure
1) Press the B+C buttons for at
least 4 s.
The motor will immediately perform a
brief confirmation movement and after
4 s will start again in descent.
2) Wait for the blind to descend
completely.
The motor is now running in dead man
mode, enabling the fine adjustment of
the "privacy" position.
3) Confirm the position pressing
B for 2 s.
As confirmation, the motor performs the
movements automatically as provided
for by the type of tilt mechanism set.
DELETING THE SENSOR
A
+
B C
4 sec
60
set
2 sec
(only with WindTec Lux)
Command sequence
.....
B
2 sec
Adjustment