Cherubini ORIENS CRC Instrucciones página 55

TIMED MODE - motors with mechanical or electronic limit switches
CHANGING THE SLAT OPENING POSITION
Initiate the indicated command sequence and wait for the blind to be completely
lowered.
+
B C
The motor is now running in dead man mode, enabling
the fine adjustment of the slat opening position.
Confirm the position with B (2 s). The motor
automatically opens the slats.
SLAT OPENING MOVEMENT
With the motor stopped press the B button briefly on the remote control. The control unit
will have the motor perform the movement based on the last command sent.
last
B
movement
DISABLING SLAT OPENING
+
B C
+
B C
DOWN
?
UP
+
B C
B
2 sec
Immediate opening of the slats.
2 sec
+
A
55
B
2 sec
Two (2) seconds of
descent followed
by the opening of
the slats.
B
2 sec