Publicidad
Idiomas disponibles
Idiomas disponibles
SMART MODE - motors with mechanical limit switches
SLAT OPENING MOVEMENT
UP
press
briefly
< 1 sec
MOVEMENT TO MIDDLE POSITION
UP
press
briefly
< 1 sec
DELETING THE LIMIT SWITCH POSITIONS
During operation, the control unit automatically acquires the mechanical limit switch
positions set on the motor. In the event that the length or position of the mechanical limit
switches need to be changed, the positions already acquired by the control unit will need
to be deleted.
+
B
C
At the end of the sequence, the control unit is ready to automatically acquire the new
limit switch positions.
ATTENTION! With this operation:
- Middle and privacy positions are deleted.
- The slat opening position is reset to the value of 0,8 s.
- The 3rd position reactivation path (CH Black tilt mechanism) is reset to 8 s of
ascent.
< 0,5 sec
.....
release
< 0,5 sec
.....
release
+
B
C
50
DOWN
press
briefly
< 1 sec
DOWN
press
and hold
> 1 sec
+
B
C
4 sec
release
release
Publicidad
