Cherubini ORIENS CRC Instrucciones página 58

SETTING COMMAND MODES FOR SLAT
The control unit may be programmed to interpret slat
movement and adjustment commands in three different
modes:
+
B C
Mode UP/DOWN movement commands from remote control or
switch
Short pulse (<1 s):
(Cherubini)
Factory
settings
Long pulse (>1 s):
US (America) Short pulse (<0,5 s):
Long pulse (>0,5 s):
EU (Europa) Short pulse (<2 s):
Long pulse (>2 s):
MOVEMENT AND ADJUSTMENT
B
fine adjustment of the slat position with motor
running for a set duration of 0,1 second
short confirmation movement, therefore movement
in continuous motion
movement in continuous motion
adjustment of the slat position with motor running
until button is released
adjustment of the slat position until button is
released
movement in continuous motion. After 2 s, the
motor pauses briefly to confirm, then starts back up.
US
EU
58
A
2 sec
B
2 sec
C
2 sec