Residual Risk - Kemper Clean Air Tower Instrucciones De Uso

Label Meaning
Warning with respect to
overpressure in the room/zone
Label with the date of next
maintenance
− Any labels and identifications, even those on foreign units, may not be removed!

3.4 Residual risk

Even in compliance with all safety provisions the operation of the filtration device is
associated with the below-described residual risk. All persons handling with the
filtration device must be aware of residual risk and follow the instructions to prevent
accidents or damage as a result of residual risk.
It may be necessary to carry out disassembly of external units for adjustment and
preparatory works. This may create various residual risks and potential hazards of
which the operator should be aware.
DANGER
Risk for life resulting from electric current!
Unplug the mains plug before start of any repair, adjustment or
maintenance operations on the filtration device!
Secure the device against unintentional turning on!
Install warning signs.
Serial No.: 1502206
Technical modifications without previous notification and errors reserved.
KEMPER CleanAirTower Instruction manual - EN
Location
On the compressed air
reservoir
Beside the control panel on the
ventilator unit
- 61 - Rev.: 1
Status as of: 05/2014