4.3 Transport by the means of ground transportation
DANGER
Life endangering injuries when transporting the components of the
filtration device!
Improper lifting and transportation can result in tipping over and
falling of the components of the filtration device!
●
Do not ever stand under suspended loads!
●
The components of the filtration device should be transported
individually and they should be attached firmly to a ground
transportation mean for transport so as to avoid risk of
overturning.
The following ground transportation means are admissible for transport of the
components of the filtration device:
movable pallets of a transport system with a transport vehicle,
–
high-lift trucks and
–
− lifting fork trucks.
Notice
Avoid contact of the components of the filtration device with the lifting equipment
of the ground transportation mean used:
●
Use e.g. spacing wooden strips inserted between the ventilator unit, filter
unit, suction part and lifting equipment for this purpose.
●
Avoid bumps when setting device components.
●
Observe the maximum load bearing capacity of the ground transportation
mean.
4.4 Storage
The filtration device components should be stored in the original container at ambient
temperature from 0 °C to +55 °C in a dry and clean place. The components may not
be loaded with other objects during storage.
Serial No.: 1502206
Technical modifications without previous notification and errors reserved.
KEMPER CleanAirTower Instruction manual - EN
- 64 -
Rev.:
1
Status as of: 05/2014