TOHATSU MFS 25C Manual Del Propietário página 36

Ocultar thumbs Ver también para MFS 25C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

34
PRE-OPERATING PREPARATIONS
Remedy
1.
Reduce the throttle to less than half
opening, and move to safe place
quickly, and stop the engine.
Check the propeller for bent or dam-
aged blades.
Consult an authorize d de aler if
engine shows the same result even
after replacing propeller with new
one.
2.
Move to safe place quickly, and stop
the engine.
Check the engine oil level, and add
engine oil if necessary.
Consult your dealer if the engine oil
6
level is too low or too high.
3.
Move to safe place quickly, and
check the discharge of cooling water
from the water check port at idle
speed and stop engine.
Remove any foreign matter on the
gear case and propeller if necessary.
Consult an authorized dealer if no
discharge of cooling water.
4.
Consult an authorized dealer.
ENOW00025-A
Low speed ESG ON: Engine speed will be
limited to 2800 min
should not continue to run engine.
High speed ESG ON: Engine speed will be
limited to 6300 min
will run rough until throttle is reduced.
CAUTION
-1
(rpm), however you
-1
(rpm) and engine

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mfs 30c

Tabla de contenido