TOHATSU MFS 25C Manual Del Propietário página 54

52
ENGINE OPERATION
stops. (This is the tilt down position.)
Now, lift up the outboard motor slightly,
and then allow gravity to lower it for you.
3
1. Reverse lock lever
2. Tilt up position
3. Tilt down position
ENOM00069-B
Power Tilt type
Tilt up
7
1. Operate the Power Tilt switch and tilt
the outboard motor up.
2. Lock the tilt with the Tilt stopper
after the outboard motor has been
tilted up
Tilt down
1. Release the tilt stopper from the
set-up position while slightly tilting
up outboard motor.
2. Operate the Power Tilt switch and tilt
the outboard motor down until the
motor touches to the thrust rod.
1
2
ENOF00059-0
UP
DN
1
1. Tilt stopper
The outboard motor can also be tilted
up and down using the switch provided
under the bottom cowl.
It is possible to tilt up or down in spite
of main switch "ON" or "OFF".
ENOM00940-0
Manual relief valve
If the battery is dead, and the power tilt
switch thus inoperative, open the man-
ual valve completely in the Manual direc-
UP
DN
ENOF00067-1
ENOF00890-0
ENOF01112-0