50
ENGINE OPERATION
Manual Tilt type
1
2
7
1. Thrust rod
2. Higher
3. Lower
Power Tilt type
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment (Manual tilt type)
The transom angle adjustment
1. Stop the engine.
ENOF00053-0
3
ENOF00674-B
2
2
3
3
1
ENOF00888-0
2. Shift into neutral.
3. Raise the outboard motor to the tilt
up position.
4. Change the thrust rod position as
following picture.
2
1. Push in
2. Rise the stopper
3. Pull out
5. Reinstall the thrust rod securely.
6. Gentry lower the outboard.
Trim angle adjustment (Power tilt type)
The transom angle adjustment
1. Stop the engine
2. Operate the Power Tilt switch and
raise the outboard motor to the tilt
up position.
3. Lock the tilt with the Tilt stopper.
4. Change the trim lock pin position as
following picture.
1
3
ENOF01238-1
2
1
ENOF01147-0