Publicidad
Idiomas disponibles
Idiomas disponibles
Setting Operating Parameters
Motor Configuration
Risk of damage to equipment.
•
Motor settings must always be checked for accuracy anytime a change in motor is connected to the package.
•
Confirm motor settings every time the unit is started. It is critical that the motor settings be correct when the unit is
started. Failure to add the correct motor parameters can result in damage to the unit.
ElectricPAK™ Motor Setup
3
9
1.
From the Home screen, select the Settings icon.
2. Press the Motor icon to navigate to the settings screen.
NOTE: The Motor settings screen can also be accessed from the control screen of manual or auto modes.
3. Verify ElectricPAK is selected under Motor Input Option.
4. Look for the six digit identifier code on the ElectricPAK™ unit.
5. Press Motor Identifier on the screen.
6. Use the keypad to enter the identifier number.
7.
Press ENT.
8. Confirm the motor settings updated to match the ElectricPAK™ motor.
9. Press Back to return to previous screen.
5
DRIVE CONFIGURATION
Setting Operating Parameters
8
13
Publicidad
