Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Risk of severe injury or death by electrical shock.
•
To minimize risk of electrical shock, disconnect power before working on or around the system.
•
Do not operate the VFD outdoors during an electrical storm. This can result in damage to the drive or personal injury.
•
Operate the VFD with door closed and locked at all times. Operating the drive with the door open should only be con-
ducted by trained personnel.
Risk of damage to equipment.
•
Do not operate the VFD with fan filters removed. This can result in dust entering, thereby damaging the unit.
•
Confirm motor settings every time the unit is started. It is critical that the motor settings be correct when the unit is
started. Failure to add the correct motor parameters can result in damage to the unit.
Manual Mode
Manual Mode allows the user to control the pump manually via the door mounted dial or the touch screen
interface. To navigate to the screen, refer to
Manual Mode Screen Navigation
5
Control buttons: Refer to
1.
2. Speed Control Source: Refer to
3. RPM Gauge: Shows the current pump speed scaled via the RPM input on the Motor Settings screen.
4. Motor Display: Displays the output amperage, voltage to the motor, and calculated motor horsepower.
5. Motor Setting: Navigation to the Motor Settings screen.
6. Home button: Returns to Home screen. If the pump is running, the user will be asked to confirm the
navigation choice, which will result in a pump shutdown.
7.
Sensor Status button: Navigation to the Sensor Status screen. Refer to
page
29.
"Home Screen Navigation" on page
1
2
4
6
"Manual Control Buttons" on page
"Speed Control Source" on page
11.
3
7
22.
22.
"Sensor Status Screen" on
OPERATION
Manual Mode
21
Publicidad
