Publicidad
Idiomas disponibles
Idiomas disponibles
COMMISSIONING AND USE
Shown below are the instruments of the control panel and their relat-
ed functions.
1
2
3
4
5
Description
Status
(1)
RECEPTION
Lit
LED
(2)
Lit
ALARM LED
(3) and (4)
LED 3 Off, LED 4 Lit
POWER
LED 3 Lit, LED 4 Lit
STATUS
LED 3 Lit, LED 4 Off
LEDs
Off
(5)
Flashing
ON/OFF LED
Lit
Off
Slow flashing
(6)
WI-FI LED
Fast flashing
Lit
CS.SB80.IST_EN_Rev. 2.0_09-23
6
8
9
7
Fig. 19
Action
Switches on when the PCB
receives a signal from the
remote control.
The appliance is in alarm
mode.
Set output on 1.
Set output on 3.
Set output on 5.
The appliance is off.
The appliance is switching
off.
The appliance is on.
The appliance is not
connected to a Wi-Fi
network.
The Wi-Fi module is
in Access Point mode
(awaiting connection to the
network).
The Wi-Fi module is in WPS
mode (signal search).
The appliance is connected
to a Wi-Fi network.
Description
Status
... operating
(7)
ON/OFF
button
... off
... in alarm block
... whenever
pressed
(8)
POWER
button
... with prolonged
pressure for 6
seconds
(9)
Serial connection for remote control
9.3
REMOTE CONTROL
Shown below are the instruments of the remote control and their re-
lated functions.
1
2
3
l
The remote control must be powered by 3 x 1.5 V
AAA batteries (model LR03 / MN2400), the life of
which depends on how frequently the remote control
is used.
EN
Action
Switches the appliance
off when pressed for 2
seconds.
Switches the appliance
on when pressed for 2
seconds.
Releases the alarm.
Allows for modifying the
"SET OUTPUT" working
power, by selecting among
3 available power levels (1,
3 or 5).
Allows the Wi-Fi module
to enter the WPS mode to
facilitate the connection
to the Wi-Fi network of
the home modem (it is
necessary to also press and
hold the WPS button of the
modem depending on its
characteristics).
6
5
4
Fig. 20
21
Publicidad
