klover SOFT 80 Instrucciones Para La Instalación, El Uso Y El Mantenimiento página 69

MAINTENANCE
10.2 CLEANING OF THE CLADDING
The ceramic cladding (if present) must be cleaned with a soft and dry
cloth. In the event of more stubborn dirt, use cleaning products suited
to ceramic or concentrated products for porcelain stoneware, capable
of removing stains caused by oil, ink, coffee, wine, etc..
d
Avoid wetting the hot ceramic surface with cold wa-
ter as the thermal shock could cause the ceramic to
break.
10.3 CLEANING OF PAINTED METAL PARTS
To clean the outer parts made of painted metal, use a soft cloth
dampened with water.
d
Do not clean metal parts with degreasing or abrasive
substances such as methylated spirits, thinners,
petrol or acetone. If these substances are used, the
manufacturer declines all responsibility for any re-
sulting damages.
l
Any shade variations of metal parts can be ascriba-
ble to improper use of the product.
10.4 OPENING THE DOOR
a
During normal operation of the appliance, the door
must ALWAYS remain shut. It can only be opened
once the appliance is switched off and has cooled
down.
To open the appliance's door, proceed as follows:
- grip the handle and push it upwards
- open the door.
It will now be possible to clean the inside of the glass or perform
cleaning and maintenance on the inner part of the appliance.
CS.SB80.IST_EN_Rev. 2.0_09-23
10.5 CLEANING THE GLASS DOOR
l
Recommended cleaning frequency: consult the para-
graph "Scheduled
The glass panel of the door must be cleaned using a damp cloth or a
detergent specifically formulated for glass-ceramic.
d
Do not use abrasive sponges or materials that can
scratch or ruin the glass, as any scratches could
evolve into cracks or ruptures.
Avoid wetting and cleaning the hot glass surface
■
with cold water as the thermal shock could cause
the glass to break.
10.6 CLEANING OF THE ASH TRAY
l
Recommended cleaning frequency: consult the para-
graph "Scheduled
Consult the paragraph
■
the ash.
To clean the ash tray, proceed as follows:
- open the appliance's front inspection panel
- unscrew the knobs
- remove the ash tray
- empty the tray of its contents
- put the ash tray back into the appliance.
Fig. 34
maintenance".
maintenance".
"Ash disposal" to dispose of
EN
Fig. 35
31