Publicidad
Idiomas disponibles
Idiomas disponibles
PART- 6.
BEFORE CALLING THE SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR TYPE
ERROR TYPE
Failure
SR
Warning
Freezer comp.
LF
Not Cold enough
Refrigerator
LC
comp.
Not Cold enough
not cold enough
LF and LC
Warning
Refrigerator
HC
comp. too Cold
Low voltage
LOPO
Warning
All manuals and user guides at all-guides.com
WHY
There is/are some part(s)
Out of order or there is a
failure in cooling process
This caution w ill be seen
especially after long term of
pow er failure
Ideal temperature for Ref.
Compartment is +4
see this w arning your foods
have risk of spoiling.
It is the combination of LF
and LC Error type
The foods starts to freeze
because of the too much
cold temperature
When the pow er supply gets
low er than 170 V the
appliance gets to steady
position.
WHAT TO DO
Call Service for assistance as
soon as possible.
1. Do not freeze the foods that are
thaw and use in short time period.
2. Set the freezer temperature to
colder values or set the super
freeze , until the compartment gets
to normal temperature.
3. Do not put fresh food until this
failure is off.
1. Set the refrigerator temperature
to colder values or set the super
o
C. If you
cooling mode until the compartment
gets to normal temperature.
2. Do not open the door much until
this failure is off
You w ill see this failure w hen first
starting the appliance. It w ill be off
after the compartments gets
normal temperature
1. Check if the "Super cooling
mode" is on
2. Decrease the refrigerator
temperature values
This not a failure. This prevents
any damages on the compressor.
This w arning w ill off after the
voltage gets required level
ENGLISH
29
Publicidad
