IPC Gansow T10 Manual De Instrucciones página 17

1. NOTES FOR THE CLIENT
This manual provides information concerning use,
maintenance and safety of themachine designed and
constructed to guarantee maximum performance, comfort
and ease of use in a variety of circumstances.
We invite you to read it with attention in order to avoid
mistakes and obtain the best results.
In addition we suggest you refer to it if problems should
arise.
Before delivery your machine was tested both in the
factory and by our dealer to guarantee perfect functioning.
To maintain the machine in this condition and assure
trouble-free use, it is necessary to perform periodical
maintenance as described in the manual.
2. MODIFICATIONS AND IMPROVEMENTS
We reserve the right to carry out, when necessary,
modifications and improvements without granting these
improvements to previously sold machines.
3. CONVENTIONS AND LEGENDA
Indications such as RIGHT or LEFT, CLOCKWISE and
ANTICLOCKWISE used in this booklet relate to the
forward movements of the machine.
The paragraphs preceded by this symbol concern
instructions which, if not followed, can cause
damage to the machine.
The paragraphs preceded by this symbol concern
instructions which, if not followed, can cause
damage to people.
The paragraphs preceded by this symbol concern
instructions which must be read very carefully.
Use this manual to get acquainted with the characteristics
of the machine and better understand how to make the
best use of them.
ENGLISH (Translation of original instructions)
4. SAFETY RULES
Most accidents at work happen because of failure to
adhere to the most simple safety regulations.
Accident prevention information will only be effective if
the operator collaborates actively and carefully.
In particular, take account of the following rules:
1. Read the instructions in this manual carefully
before using the machine.
2. Forbid the use of the machine by people who are
not authorized and instructed by qualified
personnel.
3. Pay attention to other people, especially children,
who are present while the machine is in use.
4. Check that the power supply sockets are
properly earthed and protected by thermal
magnetic and differentialswitches.
5. Make sure that the electrical features of the
mains fulfil the power supply requirements of the
machine (voltage, frequency, power draw), given
on the machine name plate.
6. USE AND STORAGE IN ENVIRONMENTS
WHERE THERE IS A RISK OF EXPLOSION IS
PROHIBITED.
7. Repairs must be performed only by our qualified
personnel.
8. Pull the plug of the power supply cord out of the
socket during maintenance operations.
9. Take care that the power supply cord for
connection to the mains is not crushed or torn
during use.
10. Do not use the machine when its power supply
cord is crushed or torn.
11. After you have replaced a component, make
sure all electrical connections are fixed in order to
ensure sufficient resistance to cable pulling.
12. Do not leave the machine unattended when it is
plugged in.
Pag. 2