Angelo Po 1S1BR1E Manual De Uso página 136

ENGLISH
For any need, please contact Angelo Po's
agents or headquarters, which can be found
in the contacts section of the website http://
www .angelopo .com .
TECHNICAL INFORMATION
"GENERAL DESCRIPTION OF
See section
THE APPLIANCE"
of the User instruction
manual .
"OPTIONAL ACCESSORIES"
See section
the User instruction manual .
"SAFETY INSTRUCTIONS AND
See section
WARNINGS"
of the User instruction manual .
If the safety thermostat is tripped, the appli-
ance has to be restored to the initial working
conditions as follows .
Cut off the mains electricity supply using the
1)
appliance's master switch .
Allow the appliance to cool for about 10 min .
2)
Remove the handle (C) .
3)
C
D
6
SERVICE REQUEST PROCEDURE
GENERAL DESCRIPTION OF THE APPLIANCE
OPTIONAL ACCESSORIES
of
SAFETY INSTRUCTIONS AND WARNINGS
USE AND OPERATION
RESETTING THE APPLIANCE
E
When requesting service, state the data indi-
cated on the nameplate and provide a descrip-
tion of the fault .
Undo the screws (D) and remove the control
4)
panel (E) .
Press the button (F) of the safety thermostat
5)
to restore the electricity supply .
Restore the initial conditions after complet-
6)
ing the operation .
F
D
TECHNICAL INFORMATION
3413950_inst_GB