Angelo Po 1S1BR1E Manual De Uso página 139

SERVICING
The appliance may be handled using fork-lift or
hook equipment of suitable load-carrying ca-
pacity .
Before lifting, check the position of the centre
of gravity of the load .
IMPORTANT: When engaging the
lifting device, watch out for the intake and
outlet pipes .
All installation stages must be considered right
from production of the general layout .
Before starting these stages, as well as deciding
the place of installation, if necessary, the per-
son authorised to carry out these operations
must organise a "safety plan" to protect the
people directly involved, as well as ensure strict
compliance with all legal requirements, espe-
cially those relating to mobile work-sites .
The place of installation must be provided with
all the connections needed to supply the appli-
ance and dispose of the production residues .
It must be suitably lit and must meet all legal
health and hygiene requirements to prevent
any food contamination .
If necessary, find the exact position of each in-
dividual appliance or subassembly and mark
the coordinates to place them correctly (see ex-
planatory diagram) .
IMPORTANT:The unit is not suitable
for built-in installation .
WARNING: Do not install the unit
next to walls made of flammable material .
WARNING: Do not install the unit on
uneven, soft or sloped floors .
3413950_inst_GB
HANDLING AND LIFTING
INSTALLING THE APPLIANCE
cm from the wall when installing the appli-
ance .
or for the well to empty into .
The installation must be in accordance with the
applicable legislation, regulations and specifi-
cations in the country of use .
WARNING: Leave a gap of at least 5
WARNING: Provide a drain in the flo-
ENGLISH
9