Braun Aesculap Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 26

17. Technical Data
Classification acc. to Directive 93/42/EEC
Art. no. Designation
GB176R Zimmer adapters
GB628R DHS/DCS adapters
GB630R Drill attachment Hudson/Zim-
mer
GB634R Jacobs chuck, keyless
GB635R Drill attachment AO small
GB636R Drill attachment Aesculap
Hexagon
GB637R Drill attachment Trinkle
GB638R Drill attachment Jacobs chuck
with key
GB643R Kirschner wire attachment
GB645R Drill attachment for radiolu-
cent angle transmission
GB654R Reamer attachment Harris
GB655R Reamer attachment A0 large
GB656R Reamer attachment Hud-
son/Zimmer
GB658R Reamer attachment Jacobs
chuck with key
GB660R Sagittal saw attachment
The products were subject to 350 preparation cycles as
a test by the manufacturer and have passed.
24
17.1 Operating mode
Operating
mode
Class
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
IIa
Operation with non-periodic load
and speed changes (type S9 pur-
suant to IEC EN 60034-1)
Drilling (clockwise/counterclock-
wise rotation):
■
60 second application,
60 second pause
■
20 repetitions
■
30 min cooling time
■
Max. Temperature 48 °C
Reaming (clockwise/counter-
clockwise rotation):
■
30 second application,
30 second pause
■
8 repetitions
■
30 min cooling time
■
Max. Temperature 48 °C
Drilling (oscillation):
■
60 second application,
60 second pause
■
4 repetitions
■
30 min cooling time
■
Max. Temperature 48 °C
Saw mode with GB660R:
■
30 second application,
60 second pause
■
3 repetitions
■
30 min cooling time
■
Max. Temperature 48 °C