General; About This Document; Safety; Indication Of Instructions In The Operating Instructions - salmson SIE BV Serie Instalacion Y Puesta En Servicio

1

General

1.1

About this document

2

Safety

2.1 Indication of instructions in the
operating instructions
Symbols:
Signal words:
Installation and operating instructions SIE...BV/DIE...BV/PBE...BV
Installation and operating instructions
These installation and operating instructions are an integral part of
the unit. They must be kept readily available at the place where the
unit is installed. Strict adherence to these instructions is a precondi-
tion for the proper use and correct operation of the unit.
These installation and operating instructions correspond to the rele-
vant version of the unit and the underlying safety standards valid at
the time of going to print.
These operating instructions contain basic information which must
be adhered to during installation and operation. For this reason, these
operating instructions must, without fail, be read by the service tech-
nician and the responsible operator before installation and commis-
sioning.
It is not only the general safety instructions listed under the main
point "safety" that must be adhered to but also the special safety
instructions with danger symbols included under the following main
points.
General danger symbol
Danger due to electrical voltage
NOTE
DANGER!
Acutely dangerous situation.
Non-observance results in death or the most serious of injuries.
WARNING!
The user can suffer (serious) injuries. "Warning" implies that (seri-
ous) injury to persons is probable if this information is disregarded.
CAUTION!
There is a risk of damage to the product/unit. "Caution" implies
that damage to the product is likely if this information is disre-
garded.
NOTE:
Useful information on handling the product. It draws attention to
possible problems.
English
31