Connecting An Mbd Coffee Vending Machine To A Baby Fas Vending Machine - FAS BABY Manual De Instrucciones

16
7.6.2 CONNECTING AN MBD COFFEE VENDING MACHINE TO A BABY FAS VENDING
MACHINE
The function of the Executive/MDB slave coffee machine cable (code no. 310110) is the same in this case,
that is to connect one vending machine to another. The connecting cable is connected to connector "C"
which is already attached to the electric panel, as illustrated in the drawing.
E
N
G
L
I
S
Coffee
H
Slave, senza gettoniera
Slave, without coin system
Selecting the coin mechanism operating mode (see also command 69 in the manual ):
•
Use command 69 to select the coin mechanism operating mode and type (the parameter can be one of
the following values : 0, 1, 2, 4 or 5). Set command 69 at "5" or "6". MDB standard or MDB with Datakey
Coges.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Do not fasten the cable to the pipes of the condenser. The high temperatures of
the condenser pipes can ruin the electric cable. Fasten the cable with bands to
the wall of the cabinet.
WARNING: The coin mechanism must only be connected/disconnected with the
machine switched off.
Connessione MDB
master / slave (1)
J4A
J4B
310107
Master / slave
MDB link (1)
FIG. 7
BABY FAS – Issue 04
J4
EXEC.
MDB
Master