FAS BABY Manual De Instrucciones página 68

24
Command 62 Enables the discounts:
A number of discounts are possible by keying in the following values at this command:
0 = no discount
1 = discount per time band.
2 = discount for key/credit card purchases (only possible in the MDB mode).
3 = discount per time band and for key/credit card purchases (only in MDB mode).
N.B. In order for the discount to be applied, the values of the time bands required must be set on the daily
timer 2
If the cashless system allows different price tables to be applied, the choice of the table to be used at the
moment of the sale is made automatically by means of the communication protocol between the machine
and reader (only possible for MDB cashless systems that feature this option).
E
Command 63 Setting for single or multivend:
N
This command determines the vend mode of the machine. With the value set at 0 the machine is working in
G
single-vend mode, and when the machine is fitted with a suitable coin mechanism the overpaid credit will be
L
returned automatically as change. Using a simple validator any excess credit is cancelled at the end of each
I
vend and the amount added to the total value of overpaid cash. If the value is 1, the machine is working in
S
multi-vend mode. After a sale any excess credit will be displayed and can be retrieved by pressing the coin
H
return push button or used for subsequent purchases. When an executive coin mechanism is fitted, this
function is programmed through the coin mechanism.
Command 64 Sets the message display language:
This command controls the language in which the messages are displayed. Value 0 corresponds to Italian,
value 1 to English, value 2 to French, value 3 to German, value 4 to Dutch, value 5 to Swedish, value 6 to
Finnish and value 7 to Spanish 8 to Portuguese 9 to Danish 10 to Norwegian. To display the messages in
English, proceed as follows:
1. Go into programming mode to display ................................................................................._Command 00_
2. Key in 64 and press the B button to display the present value of the parameter ................................... _N_
3. Set Value 1 and press the B button.
Command 65 Displays the optional messages:
This command is used to modify the messages displayed by the machine in stand-by (machine ready for
vending). By setting the command at 1, the machine displays the message "insert card", which can be used
when the payment system is the credit card type.
Command 66 Displays the clock:
If the command is set at 1 while the machine is in standby position, the current time appears on the display.
N.B.: The clock has to be programmed to obtain reliable values (Alarm set 02)
Command 69 Chooses functioning mode of the coin mechanism:
This command chooses the type and the mode of functioning of the coin mechanism. The parameter can
have the following values:
0 System EXECUTIVE with prices controlled in the machine
1 System EXECUTIVE in mode PRICE HOLDING (i.e. prices programmed in the coin mechanism). In
this case the prices programmed at command 03 and those programmed in the coin mechanism
have to be the same.
4 BDV 001 system (see paragraph using the coin mechanism BDV)
5 MDB system (see paragraph using payment system MDB).
Command 70 Buzzer operation option:
By setting this command at zero the buzzer is disconnected during machine operation.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
BABY FAS – Issue 04