Kingston Technology IronKey D500S Manual Del Usuario página 25

D500S Settings
User Settings: Admin not enabled
As mentioned previously, initializing the D500S without enabling 'Admin and User' passwords will configure the
drive up in a Single Password, Single User setup (User-Only mode). This configuration does not have access to any
Admin options or features. This configuration will have access to the following D500S settings:
Password:
Allows you to change your own User
password and/or hint (Figure 7.8)
Contact Info:
Allows you to add/view/change your
contact information (Figure 7.9)
Language:
Allows you to change your current
language selection (Figure 7.10)
Figure 7.8- Password Options (User-Only Mode)
Figure 7.9- Contact Information (User-Only Mode)
Figure 7.10- Language Settings (User-Only Mode)
24