Kingston Technology IronKey D500S Manual Del Usuario página 41

Device Usage (Linux Environment)
D500S login (continued)
IkD500S_login (Unlock D500S, Figure 10.4)
Depending on how your drive was set up,
during the login process you may be
presented with a number of options on
how you would like to unlock your drive.
If Admin/User password profiles were
enabled during initialization, you will be
presented with the following login options:
1.) Choose to login as Admin or User
2.) Choose to unlock Admin or User
partitions (if enabled)
3.) Enter respective Admin or User
login password for device
authentication and unlocking.
Note: If Admin/User password profiles
were NOT enabled during initialization
(User-Only mode), you will only be
prompted to only enter your device
password for device authentication.
Important: As mentioned previously,
Passphrase passwords are not supported on
Linux and the D500S will need to be configured
with a Complex password for Linux login (Figure
10.5)
Figure 10.4 – ikD500S_login (Unlocking D500S)
Figure 10.5- Unsupported Passphrase password login attempt.
40