Publicidad
Idiomas disponibles
Idiomas disponibles
Getting Started
qin
Check that you received the following items:
* Audio connecting cords (2)
¢ Optical cable (1)
¢ Remote commander (remote) RM-D27M (1)
© Size AA (RO) batteries (2)
Inserting batteries into the remote
You can control the deck using the supplied remote.
Insert two R6 (size-AA) batteries by matching the +
and - on the batteries. When using the remote, point it
at the remote sensor Hl on the deck.
Key When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the deck,
replace all the batteries with new ones.
Notes
¢ Do not leave the remote near an extremely hot or humid
place.
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
te
Hooking Up the System
Overview
to a wall outlet
(or to a timer during timer
recording or playback)
i Connect only :
"tone digital
:
! component at :
'a time.
;
DIGITAL
IN
DAT deck or
MD deck, etc.
==™ 2 Signal flow
What cords will | need?
¢ Audio connecting cords (supplied) (2)
Publicidad
