HURNER HST 300 Pricon 2.0 Manual De Instrucciones página 34

3 Service and Repair
3.1 General
As the product is used in applications that are sensitive to
safety considerations, it may be serviced and repaired only
by the manufacturer or its duly authorized and trained
partners. Thus, constantly high standards of operation
quality and safety are maintained.
Failure to comply with this provision will dispense
the manufacturer from any warranty and liability
claims for the product, including any consequential
damage.
When serviced, the unit is upgraded automatically to the
technical specifications of the product at the moment it is
serviced, and we grant a three-month functional warranty
on the serviced unit.
We recommend having the product serviced at least every
twelve months.
Any provisions in the law pertaining to an electrical safety
inspection have to be complied with.
3.2 Transport, Storage, Shipment
The product ships in a transport box. The product should
be stored in this box, protects the product from humidity
and environmental agents.
When sending the product, it should be placed into the
transport box at all times.
4 Principles of Operation
The HST 300 Pricon 2.0 allows welding electrofusion fit-
tings that feature a bar code. Every fitting is provided with
a tag with one or two bar codes on it. The structure of this
code is internationally standardized. The first code, encod-
ing the data on proper welding, complies with ISO 13950,
the second code, if present, encoding the component trace-
ability data, complies with ISO 12176-4. The model version
with GPS module can additionally be used to record the
geographic coordinates of the place where the welding
operation is performed, which will then be added to the
relevant welding report.
8
EN
HÜRNER HST 300 Pricon 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Version January 2018