HURNER HST 300 Pricon 2.0 Manual De Instrucciones página 44

and have it decoded. If the code entered is not correct, a
"Code Error" message appears; check the string of numbers
and correct as needed. If the code is correct, the decoded
data is displayed, and the "Start ?" message indicates that
the unit is ready to start welding.
8 Downloading the Reports
Interface
USB A Interface Port
for connecting USB mass storage media (such as a
memory stick)
The interface port complies with the USB version 2.0
specification (i.e., maximum data rate of 480 megabits
per second).
Before transferring data, it is highly recommended
to switch the welding unit off and on again. If this
fails to happens, there is a risk of data transfer
Important
failure, or reports in the welding unit may be cor-
rupted.
When transferring welding reports to a USB stick,
always be sure to wait until the display shows the
Important
"Download finished" message before you discon-
nect the USB stick from the product. If you discon-
nect it too early, the unit may ask you whether you
want to delete the reports in memory, although
they were not properly transferred. In this case,
if you delete the contents of the report memory,
the welding reports would be irrevocably lost and
would not be available elsewhere either.
8.1 Selecting the File Format
Connecting the storage media causes the the screen to
appear in which the format of the output file with the
welding reports can be selected: a PDF file with an ab-
stracted or extended version of the report, the format of
the welding data management application DataWork or
a CSV file. Using the ñ and ò arrow keys, select the file
type you need and confirm your selection by pressing the
START/SET key.
The CSV format enables import of the report data into
a database or spreadsheet application, provided this ap-
plication can read the format; this is the case, e.g., with
Microsoft Excel.
18
EN
HÜRNER HST 300 Pricon 2.0 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
* Select File Type *
DataWork File
>PDF Abstract
PDF Ext'd Report
Version January 2018
Display 16