HURNER HST 300 Pricon 2.0 Manual De Instrucciones página 45

H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
The Service Report option is not important for normal
operation. In the scope of computer-assisted unit service,
this report lists the events related to the maintenance of
the welding unit.
8.2 Downloading All Reports
After the file type was selected, the next screen offers a
"Print All Reports" option. Selecting it will download all
welding reports currently in system memory in the previ-
ously selected file format.
8.3 Downloading by Commission Number, Date or
Report Range
After the file type was selected, the next screen offers a
"By Commission Number," a "By Date Range," and a "By
Report Range" options. Depending on the selection, the ñ
and ò arrow keys can be used to select from the commis-
sions currently in system memory the desired one, of which
the reports should be downloaded, or the alphanumeric
keypad can be used (see Info in Sect. 5.2) to enter a start
date and an end date, or the first and the last report, that
define a range of dates or a range of reports of which the
reports should be downloaded. When you press the START/
SET key, you cause the selected reports to be transferred
to the storage media.
8.4 Understanding the Report Download Process
The download starts automatically after a selection was
made among the options. Wait for all the selected reports
to transfer and the "Download completed" message to
appear on the screen.
If a problem occurs while the download is in progress, a
"Not ready" message shows. After the problem condition
is cleared, the download resumes automatically.
If the welding unit recognizes a problem that
cannot be cleared while the data transfer is in
Info
progress, it does not resume the process and dis-
plays a "Download cancelled" error message. To
acknowledge this error, press the START/SET key.
8.5 Deleting Data from Memory
The report data in memory can be deleted only after all
welding reports were transferred, which is indicated by the
"Download completed" message. When the storage media
is unplugged, a "Delete Memory" message appears. If the
START/SET key is pressed at this point, a further confirma-
Version January 2018 HÜRNER HST 300 Pricon 2.0 User's Manual
19
EN