Denon DCD-695 Instrucciones De Operación página 7

~)
Auto Space Button (A. SPACE)
Time Mode Button (TIME)
Pressing the button once, is displayed and the
remaining time of the current track is displayed.
Pressing once more,
is displayed, and total
playing time of remaining tracks is displayed. However,
when programmed play is in progress, the total remain-
ing time of the program is displayed.
Display Button (DISPLAY)
e One press of this button during play will turn off the
entire display; in conditions other than the play mode,
only the track number will be displayed.
e Pressing the button once more will provide a return to
the regular display.
e Press this button for repeat playback between a desig-
nated starting point (A) and an ending point (B). (Refer
to page 13 for details.)
+10 Button (+10)
For track number 33, press [+10 |three times, then press
'
e Press this button to return the pickup to the beginning of
the present track. Press again to return to other tracks.
e By pressing the button a number of times, the pickup
will move
back the corresponding
number of tracks.
Automatic Search Forward Button ( DPI)
e@ Press this button to move the pickup forward to the
beginning of the next track. Press again to move ahead
to other tracks.
e By pressing the button a number of times, the pickup
will advance the corresponding number of tracks.
ENGLISH
@ Manual Search Reverse Button ( 4d )
e Press this button during playback for fast reverse
search. As long as the button is kept pressed, music
signals are played back faster than normal.
e Pressing this button when the pause mode is engaged,
you can quickly reverse the pickup to a desired position,
three times faster compared to manual reverse search
during playback. During this time, no sound is heard.
@ Manual Search Forward Button ( PP )
e Press this button during playback for fast forward
search. As long as the button is kept pressed, music
signals are played back faster than normal.
e Pressing this button when the pause mode is engaged,
you can quickly forward the pickup to a desired position,
three times faster compared to manual forward search
during playback. During this time, no sound is heard.
@ Headphones Jack (PHONES)
e For private listening, you can connect your headphones
to this jack. Do not raise the volume level too much
when listening through headphones. (Headphones are
sold separately.)
Output Terminal (LINE OUT)
e Connect these jacks to the input jacks on your amplifier.
(Refer to page 7 for details on the connections.)
SYNCHRO Jack
AC INLET
e Connect the included AC cord here.
e This jack outputs digital data.
=)
~)
Continuous Button Operation
If the automatic search reverse button @®, the automatic
CONNECTION
(1) Connecting the Output Terminal (LINE OUT)
Use the included pin cords to connect the left (L) and right (R)
output terminal {LINE OUT) of the DCD-695/595 to the CD,
AUX, or TAPE PLAY left (L) and right (R) input jacks of the
amplifier.
DCD-695/595