Cebora PLASMA SOUND PC 110/T Manual De Servicio página 46

CEBORA S.p.A.
Prepare a metal workpiece to cut.

Adjust the encoder knob (H) to the current level suited to the kind of cutting.

With pilot arc on, position the welding torch near the workpiece to cut.

♦ Begin cutting.
Release the torch start pushbutton.

The arc shuts off immediately. Gas continues to emerge for a time ranging from 15

to 20 s depending on the current set after releasing the start pushbutton
NORMAL OPERATION.
3302342
(see sections 3.3.5, 3.3.6)
(see section 3.3.6)
46
10/07/2019