Publicidad
Idiomas disponibles
Idiomas disponibles
Decal Part: 144-5288
Note:
This machine complies with the industry standard stability test in the static lateral and
longitudinal tests with the maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's Manual as well as the
conditions in which you would operate the machine to determine whether you can operate
the machine in the conditions on that day and at that site. Changes in the terrain can result
in a change in slope operation for the machine.
Decal Part: 147-2399
3466-517A
s_decal144-5288
s_decal147-2399
Page 2–5
Warning—read the Operator's
Manual.
Cutting/dismemberment hazard of
the fingers or hand—keep hands away
from moving parts; keep all guards and
shields in place.
Thrown object hazard—keep
bystanders away; pick up debris; keep
the deflector in place.
Runover hazard—do not carry
passengers; look behind you and down
when moving in reverse.
Tipping hazard—when loading onto
a trailer, do not use dual ramps; only
use a singular ramp wide enough for the
machine; do not use a ramp with a
slope greater than 15°; back up the
ramp (in reverse) and drive forward off
the ramp.
Tipping hazard—do not use the
machine near drop-offs with slopes
greater than 15°; only operate across
slopes less than 15°.
Read the Operator's Manual.
Warning—Fill to bottom of filler
neck; warning–do not overfill the tank.
Safety: Safety and Instructional Decals
Publicidad
