Descargar Imprimir esta página

cecotec CLEANFRY 3L Manual De Instrucciones página 41

Freidore eléctrica

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
-
Do not fill more than half of the frying basket.
-
Avoid draining food too long in the basket, as it may become soft and loose its crispness.
-
Change the oil when it becomes brown or milky.
-
If there are water droplets on the base of the tank, the oil should be changed.
-
Change the oil in your appliance after approximately 15 uses.
-
All food items, particularly frozen food and potatoes, contain moisture.
-
When lowered into the hot oil, the water in the food turns to steam and escapes.
-
Take into account the food to be cooked before selecting the frying temperature.
-
As a general guide, pre-cooked food needs a higher cooking temperature than raw food.
4. CLEANING AND MAINTENANCE
-
Remove the lid (1), control panel (3), frying basket (4), filter (15) and tank (7).
-
Pour out the oil in the tank through fine muslin or absorbent paper placed over a funnel
into a suitable container.
-
Wash the lid, basket, filter, and tank by hand with hot soapy water.
-
The tank is dishwasher safe. Take it out of the dishwasher as soon as possible and dry it
thoroughly.
-
Wipe the control panel with a damp cloth and/or kitchen paper.
-
Do not immerse the control panel in water.
-
Make sure the wires connected to the heating element are not damaged while cleaning.
-
Dry all parts of your fryer thoroughly and place the tank, control panel, frying basket, and
lid back in place. When placing the tank, make sure it is placed correctly, with the max/min
marks to the right.
-
You may keep oil in the fryer if you make sure that the lid is properly closed.
-
Regular cleaning of the oil with the OilCleaner filter.
-
Use the OilCleaner filter to clean the oil and the fryer easily. The remainders from the
foodstuffs will sink when the oil cools down.
-
If you use the filter, you will be able to remove the remainders, keeping the oil clean longer
and minimising the appearance of undesired flavours.
-
Wait until the oil and the heating element are completely cold before proceeding as follows:
-
Unplug the fryer, remove the lid and the frying basket, and clean them separately.
-
Remove the heating element raising it carefully to prevent the oil from overflowing.
-
Separate the OilCleaner filter from the heating element.
-
Clean filter with hot water and soap and dry it.
-
Attach the OilCleaner filter to the heating element, sliding it in the opposite direction.
-
Put the heating element with the OilCleaner filter in the fryer.
Fig 4.
ENGLISH
CLEANFRY 3L / 3L BLACK
41

Publicidad

loading

Este manual también es adecuado para:

Cleanfry 3l black0303203033