cecotec CLEANFRY 3L Manual De Instrucciones página 8

dropped or damaged in any way.
- The appliance must not be used in potentially dangerous
locations, such as flammable, explosive, chemical-laden, or
wet atmospheres, nor near flammable materials.
- Place the fryer on an even, heat-resistant surface. Do not
place the device near heat sources, places with high humidity
levels, or combustible materials.
- There are no internal serviceable parts. Do not attempt to
disassemble the appliance.
- This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
- Do not insert or allow fingers or foreign objects to enter
any ventilation or exhaust openings, as it could cause an
electrical shock or fire.
- Do not turn the fryer on if there is no oil in the tank.
- It is not advisable to mix different oil types or oils with
different qualities.
- The fryer has a safety thermostat that turns the fryer off in
case of overheating. This may happen if there is not enough
oil in the tank.
- Do not attempt to move the fryer until it has completely
cooled down. This can take up to 3 hours. Use the handles
at both sides.
- Do not immerse the cord, plug, or any non-removable part
of the fryer in water or any other liquid. Do not expose the
electrical connections to water.
- Make sure your hands are dry before handling the plug or
switching on the appliance.
- Unplug the appliance from the mains supply before cleaning
or maintenance task, or when not in use. Allow it to cool
down completely before attaching or removing parts, and
before cleaning the appliance.
8 CLEANFRY 3L / 3L BLACK