Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
3 INSTALLATION
3.1 SELECTION OF INSTALLATION PLACE
Select a suitable place for handling and determine the installation place of the central station with the customer's acceptance.
Do not install the central station in places which are at the reach of children or where the air from the air conditioner is directly
discharged.
Before installing the controller, prepare the following items.
Parts
Switch Box
Power Supply Cable
H-LINK Cable (For control)
* The recommended cables are the model name of Hitachi Cable, Ltd.
3.2 COMPONENTS LIST
Unpack the unit and check that:
•
The package contains all the components (see next table).
•
All components are in perfect condition.
Otherwise, contact the manufacturer.
Name
Central station PSC-A32MN
M4x16L screws
Touch pen
Touch pen holder
USB stick memory
Instruction manual
Connector Cord
Closed End Connector
Nylon Band
3
PMML0332A rev.0 - 05/2015
JIS switch box for 2 switches (with cover) (JIS C 8340)
Cable specification: 1.25 to 2 mm
Recommended cable: 600V CV, CCV, CEV
Cable SPEC: 0.75 to 1.25 mm
2
Recommended cable: JKEPV-S, JKEV-S, CVV-S, CVV, 600V VCT
Quantity
1
運転/停止 電源
4
2
1
1
1
3
9
3
Specification
2
Comments
For controlling system operation
For fixing the central station.
For activating/deactivating the touch options on the screen.
For holding the touch pen on the central station.
With the detailed Installation and operation manual
Basic instructions for the installation of the device.
For using external input/output functions (CN1~3).
For closing the wire end of the connection cord.
For fixing the cables.
Publicidad
