Operation
Copying schedule setting by each group
1 Select "Schedule Settings" at the "Menu" screen.
2 Select "Schedule Timer Setting" at the "Schedule Settings" screen.
3 Tap "Copy Settings".
4 Select the group to copy. (A block cannot be selected as a source for copy).
•
The button of the selected group is highlighted in orange.
•
Tap the selected group again to cancel the selection. The orange frame disappears then.
5 Select the destination group (or block) to paste.
•
A check mark " " is displayed in the selected buttons.
•
It is possible to select multiple groups (including blocks) as paste destination.
•
To cancel the selection, press the selected group again. The check mark " " disappears then.
6 Tap "Paste" to copy the schedule settings.
•
Go back to step (4) to copy the schedule of other groups.
•
Proceed to step (7) to finish.
7 Tap "Return to Group sel." to return to the "Group Selection" screen.
(5)
47
PMML0332A rev.0 - 05/2015
(4)
(3)
(7)
(6)