Hitachi PSC-A32MN Manual De Instalación Y Funcionamiento página 21

Operation
Item
Demand Function Setting
Demand Function Setting
Selection of Group for
Demand Function
Button Setting
Contact Information Register
13 PMML0332A rev.0 - 05/2015
This function is used for setting of "Demand Function" to the terminal of "Input 1".
Operation state changes by demand signals such as operation stop, or thermo-OFF.
"Demand Function" is available under the following conditions.
1. Selecting "Demand Function" for "Input 1" at the "External Input/Output Setting" screen. ("Demand Function"
is not available without this setting.)
2. Selecting one of "Demand Function" No.1 to No.4 at "Demand Function Setting" screen.
This function is used for selecting the action for "Demand Function" control.
This function is used for selecting the target group for "Demand Function" control.
This function is used for specifying whether each button shall be shown or hidden.
This function also includes the specification of "one-tap" or "press and hold" operation style of the touchscreen.
This function is used for editing the contents of contact information.
Function